When working on the exterior of high-rise buildings, the biggest challenge is providing safe and efficient access. Traditional scaffolding systems create serious difficulties in terms of both installation and cost. This is where the moving facade platform — also known as a mast climbing work platform or facade access platform — comes in.
What Is a Moving Facade Platform?
A moving facade platform is an exterior access machine that moves vertically along metal masts mounted on the outside of a building, powered by an electric motor system. It is used for all kinds of facade work including painting, plastering, insulation, glass and aluminum cladding, and granite installation.
Also referred to as a building facade platform or exterior access platform, this system is much faster and easier to install compared to traditional spider scaffolding. Once mounted, it moves freely along the building, providing workers with safe access to every point they need.
How Does It Work?
The system consists of three main components:
1. Metal Masts: The load-bearing elements that enable vertical movement of the platform. Can be installed as single or double mast configuration.
2. Platform (Working Basket): The safe working area where workers operate, featuring a galvanized steel floor. Can extend up to 10.5 meters with a single mast and up to 30 meters with a double mast.
3. Electric Motor System: The system that moves the platform up and down along the masts. Has a load capacity of up to 2,000 kg and can operate at heights up to 250 meters.
Key Safety Systems
Work safety is the most critical element in mast climbing work platforms. Safety systems standard on Aser Makina platforms include:
- Motorized Brake System — platform automatically locks when power is cut
- Automatic Platform Leveling System — maintains balance even on sloped surfaces
- Emergency Stop System — instant stop with a single button
- Mast End Detector — automatic stop at upper and lower mast limits
- Manual Emergency Descent System — safe descent even in case of power failure
- Audible Movement Warning — alerts nearby personnel
All systems are certified to European standards EN 1495 and CE.
What Applications Is It Used For?
The exterior access platform is used in both new construction projects and renovation or maintenance works on existing buildings:
- Exterior painting and plastering
- Thermal insulation and cladding applications
- Glass, aluminum, and granite panel installation
- Building facade repair and renovation
- Facade cleaning and maintenance works
Purchase or Rental?
Facade platform rental is an economical solution for short-term projects. However, for contractors and construction companies with continuous workloads, purchasing is far more advantageous in the long run. Aser Makina offers both options.
Moving facade platform prices vary depending on platform width, load capacity, and number of masts. Contact us for a project-specific quote.
Advantages Over Traditional Scaffolding
| Moving Facade Platform | Traditional Scaffolding | |
|---|---|---|
| Installation time | 1-2 days | 1-2 weeks |
| Mobility | Freely movable | Fixed |
| Material handling | Possible | Limited |
| Work safety | High (automatic systems) | Operator dependent |
| Cost | More economical | Higher |
Conclusion
The moving facade platform — also known as a mast climbing work platform or facade access platform — is the most efficient solution for exterior facade work on high-rise buildings in terms of time, cost, and work safety. Choosing the right equipment directly affects both the speed of the project and the safety of workers. Working with an EN1808 and CE certified, domestically manufactured system meets legal requirements while minimizing maintenance and spare parts costs in the long run.
Contact us to get information or request a quote for a moving facade platform or rental options suitable for your project: Get in Touch.
